8BitDo Mechanical Keyboard Fami Edition
Original price was: 109,90 €.99,90 €Current price is: 99,90 €. Inc. VAT
Original price was: 109,90 €.99,90 €Current price is: 99,90 €. Inc. VAT
MonsGeek M3 V5 HE – Magnetic TKL Keyboard, 8K Polling and Rapid Trigger 0.005mm
The MonsGeek M3 V5 HE brings the M V5 HE platform to the TKL format – 87 keys, no numpad, maximum desk space. It runs the same Rapid Trigger 0.005mm, 32K scan rate and 8K wireless polling as the rest of the V5 HE line, in the layout that most competitive gamers choose when mouse space is a priority.
Rapid Trigger & Scan Rate Architecture
Actuation and reset points are configurable in 0.005mm steps along the 3.5mm of total travel. At a scan rate of 32,000Hz, even a 0.1mm elevation is resolved in multiple scanning cycles – which makes the RT below 0.01mm stable rather than erratic. 15 dedicated logic ICs offload auxiliary tasks from the Arm Cortex-M4 MCU, keeping TProcessing consistent under burst input without the bottleneck that cheaper 32K implementations suffer under sustained rapid-fire conditions.
RT Stabilizer mode filters out unintentional jitter at sensitivities below 0.01mm, without affecting intentional inputs.
8K Polling Rate – Wired and 2.4GHz Wireless
8,000Hz polling is active on both USB-C and 2.4GHz wireless. Bluetooth drops to 125Hz for switching between devices (up to 3 via Fn+E/R/T) – not for competitive sessions. Wireless polling at 8K on a TKL keyboard at this price is unusual; most Hall Effect keyboards with wireless still limit it to 1K.
DKS, Snap Key & Advanced Input
DKS maps four independent actions to a single key – light pressure activates action one, deeper pressure activates action two, with two configurable release points. In a TKL where each key already fulfills its function, DKS adds a genuine input layer without requiring layout compromises.
Snap Key manages SOCD by reporting the most recently pressed directional input – clean counter-strafes in CS2 and Valorant without ambiguity. Mod-Tap adds dual-function keys (tap vs. hold), and Toggle Key turns any key into a persistent on/off switch.
Akko AstroAim Switches & Cross-Compatibility
Linear, factory pre-lubricated, 35gf initial force, 3.5mm travel. POM stem and PA66 housing produce a deeper, more bassy sound than most Hall Effect switches – less hollow, less metallic. Cross-compatible with any N-pole downward-facing magnetic switch from third-party brands, with per-key mixing and automatic calibration via MonsGeek Driver.
Construction & Acoustics
Gasket mount with PORON plate foam and IXPE switch pads for a damped bottom-out. The plate-mounted stabilizers are demagnetized to prevent magnetic field interference on the larger keys. The ball-catch quick-release system opens the case without tools.
⚠️ Compatibility Notice: Magnetic switches only – MX mechanical switches are NOT supported. For a keyboard that runs magnetic and mechanical switches at the same time, see the MonsGeek M1 V5 TMR.
⚠️ Software Note: Configuration exclusively via MonsGeek Driver (browser-based). QMK and VIA are not supported.
IN THE BOX
- 1× MonsGeek M3 V5 HE Keyboard
- 1× USB-C cable (150cm)
- 1× 2.4GHz Wireless Receiver
- 1× Keycap Extractor
- 1× Switches Puller
- 1× Set of Supplementary Keycaps
- 1× Keyboard Protection Cover
- 1× User Manual
3
| SPECIFICATIONS | DETAILS |
|---|---|
| Model | MonsGeek M3 V5 HE |
| Switch type | Akko AstroAim Magnetic Linear (N-pole, downward-facing) – pre-lubricated |
| Switch compatibility | Cross-compatible with N-pole downward-facing magnetic switches (7 third-party brands) – MX mechanical switches NOT supported |
| Switch actuation force | 5gf initial – 45±5gf at 2mm – 55gf maximum final force |
| Total Switch Distance | 3.5±0.1mm |
| Switch life | 50 / 100 million clicks |
| Polling Rate | 8,000Hz (wired USB-C and wireless 2.4GHz) – 125Hz (Bluetooth) |
| Scan Rate | 32,000Hz |
| Rapid Trigger Accuracy | 0.005mm (adjustable in steps of 0.005mm, entire key travel) |
| SOCD | Snap Key (priority to the most recent input) |
| Advanced Modes | DKS – Mod-Tap – Toggle Key (TGL) – RT Stabilizer – Continuous Rapid Trigger – Adjustable Actuation |
| CPU | Arm Cortex-M4 + 15 dedicated logic ICs |
| Layout | TKL ANSI – 87 keys |
| Case material | Aluminum (top and bottom) |
| Mounting structure | Gasket Mount |
| Quick Release | Ball-catch mechanism (without tools) |
| Sound damping | PORON plate foam – IXPE switch pads – PET layer |
| Stabilizers | Demagnetized plate-mounted stabilizers |
| Keycaps | PBT – Shine-through – Legends pad-printed |
| Switch orientation | South facing |
| Backlighting | ARGB – Per key – 15+ preset modes – Refresh rate 500Hz |
| Connectivity | Wired USB-C – Wireless 2.4GHz (receiver included) – Bluetooth 5.0 (up to 3 devices) |
| Battery | ~8,000mAh built-in |
| N-Key Rollover | Yes (NKRO) |
| Hot-Swap | Yes (magnetic switches only) |
| Software | MonsGeek Driver (browser-based) – QMK/VIA not supported |
| OS compatibility | Windows – macOS – iOS – Android |
| Cable | USB-C – 150cm |
| Product weight | 1.8 kg |
| Available colors | Transparent Matte Black – Transparent Matte White |
Reviews
There are no reviews yet